| Title |
A Propose of Design Parameters for the Max. Speed of 250 km/h of Overhead Rigid Conductor System |
| Authors |
이기원(Lee, Kiwon) ; 조용현(Cho, Yong Hyeon) |
| DOI |
https://doi.org/10.5370/KIEE.2017.66.4.740 |
| Keywords |
Rigid conductor ; 250 km/h ; Overhead line |
| Abstract |
Overhead Line is divided by two systems which are OCS (Overhead Catenary Line) and R-Bar (Overhead Rigid Conductor system). R-Bar has an advantage of maintenance and economic aspect comparing with OCS. R-Bar in Korea has developed for the max. speed of 120km/h, but it is evaluated up to the max. speed of 250 km/h in Europe. There are lots of mountains and underground sections in korea, it is really necessary to develop the R-Bar for a high-speed line. In the study, design parameters for the max. speed of 250 km/h of R-Bar was proposed. A bracket space, stiffness, and especially an installation tolerance of contact wire height at a bracket were considered as a parameter, and a dynamic behavior between a contact wire and pantograph was predicted by evaluated FEM simulation tool. The installation tolerance and bracket space are more important for the high-speed system. The proposed parameters was decided very conservative. Because the aerodynamic characteristics of a pantograph in tunnel is more severe than an open route and the simulation tool is not considered the such kind of aerodynamic characteristics. |