D. Wu, Z. Xiang, X. Zhu, L. Quan, M. Jiang, Y. Liu, 2021, Optimization Design of Power Factor for an In-Wheel Vernier PM Machine From the Perspective of Air-Gap Harmonic Modulation, in IEEE Transactions on Industrial Electronics, Vol. 68, No. 10, pp. 9265-9276

D. Kim, J. Song, J. Kim, Y. Kim, J. Ro, S. Jung, 2018, Design of Vernier Motor with Modular Winding Using Rotor Pole Pair Determination Method, 2018 XIII International Conference on Electrical Machines (ICEM), pp. 165-170

B. Kim, 2019, Design Method of a Direct-Drive Permanent Magnet Vernier Generator for a Wind Turbine System, in IEEE Transactions on Industry Applications, Vol. 55, No. 5, pp. 4665-4675

D. K. K. Padinharu, G. J. Li, Z. Q. Zhu, R. Clark, A. Thomas, Z. Azar, 2022, AC Losses in Form-Wound Coils of Surface Mounted Permanent Magnet Vernier Machines, in IEEE Transactions on Magnetics, Vol. 58, No. 6

Y. Liu, H. Y. Li, Z. Q. Zhu, 2018, A High-Power Factor Vernier Machine With Coil Pitch of Two Slot Pitches, in IEEE Transactions on Magnetics, Vol. 54, No. 11

Hyuk-Sung Kwon, 2020, Optimal Design of Vernier Permanent Magnet Motor for Robot Joint(Ph.D dissertation) Seoul University, Republic of Korea

A. Toba, T. A. Lipo, 2000, Generic torque-maximizing design methodology of surface permanent-magnet vernier machine, in IEEE Transactions on Industry Applications, Vol. 36, No. 6, pp. 1539-1546

H. Wang, 2017, A Novel Consequent-Pole Hybrid Excited Vernier Machine, in IEEE Transactions on Magnetics, Vol. 53, No. 11

K. Yamazaki, Y. Seto, 2006, Iron loss analysis of interior permanent-magnet synchronous motors-variation of main loss factors due to driving condition, in IEEE Transactions on Industry Applications, Vol. 42, No. 4, pp. 1045-1052

S. -B. Jun, C. -H. Kim, J. H. Lee, J. -K. Kang, Y. -J. Kim, S. -Y. Jung, 2022, Parameter Optimization for Reducing Torque Ripple and Harmonic Losses of Multi-Layered Interior Permanent-Magnet Synchronous Motors, in IEEE Access, Vol. 10, pp. 10536-10552

Dae-Woo Kim, Dongsu Lee, Yong-Jae Kim, Sang-Yong Jung, 2016, Design Method of Spoke Type Motor considering Irreversible Demagnetization, Electrical Machinery & Energy Conversion Systems Society Annual Spring Conference 2016, pp. 110-112